57 products
57 products
FMF TRX250R 86-89 PIPE SPRING & O-RING KIT P/N 011385 011385
011385
Fatty 020143
020143
Our Fatty Gold Series pipe broadens the powerband and provides a healthy power increase everywhere. Improved throttle response, a linear powerband and enhanced over-rev all add up to a pipe that everyone will benefit from. The Fatty pipe is our most popular pipe for that same reason. If you’re riding trails, tracks or in the open desert, this pipe has what you’re looking for.
- Number one pipe on the market.
- FMF Racing’s Tru-Flo stamping process ensures a perfect fit and optimum performance.
- Includes O-rings.
FMF BANSHEE 87-06 PIPE SPRING & O-RING KIT P/N 011319 011319
011319
Factory 4.1 RCT Anodized Full System/ Carbon End Cap 044438
044438
PowerBomb 042306
042306
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
Fatty 020006
020006
Our Fatty Gold Series pipe broadens the powerband and provides a healthy power increase everywhere. Improved throttle response, a linear powerband and enhanced over-rev all add up to a pipe that everyone will benefit from. The Fatty pipe is our most popular pipe for that same reason. If you’re riding trails, tracks or in the open desert, this pipe has what you’re looking for.
- Number one pipe on the market.
- FMF Racing’s Tru-Flo stamping process ensures a perfect fit and optimum performance.
- Includes O-rings.
MegaBomb 044358
044358
The science behind the Megabomb header may be our greatest engineering accomplishment to date. You can pay an engine builder thousands or bolt on a Megabomb for as much as a 3hp boost! Plus, the megabomb actually reduces noise levels by as much as 1.5dB. The megabomb header will have you pulling holeshots and dusting all the boys on the way up Competition Hill. Simply bolt it on and go faster.
- Increases output from stock motor as much as 3hp
- Produces long header torque and short header over-rev
- Made from Premium American Metal materials
- Patent pending design
Banshee Fatty 020145
020145
Our Chrome Fatty Gold Series pipe broadens the powerband and provides a healthy power increase everywhere. Improved throttle response, a linear powerband and enhanced over-rev all add up to a pipe that everyone will benefit from. The Fatty pipe is our most popular pipe for that same reason. If you’re riding trails, tracks or in the open desert, this pipe has what you’re looking for.
- Number one pipe on the market.
- FMF Racing’s Tru-Flo stamping process ensures a perfect fit and optimum performance.
- Includes O-rings.
PowerBomb 044298
044298
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
PowerCore 020199
020199
The original Powercore is a lightweight and compact silencer constructed of an extruded aluminum canister with nickel plated stinger and end cap. It is fully re-buildable using basic hand tools. It offers that factory look and sound while giving you an increase in power over the stock silencer.
Q4 044301
044301
FMF is the leader in high performance quiet technology and our Q4 is the next evolution in off road exhaust. The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available. With the Q4 you don’t need to hear the power, just feel the power!
- Developed over years of championship off-road racing
- Max Sound output 96dB; most models below 93dB
- Constructed from aircraft grade aluminum and high strength stainless steel
- Use with stock or FMF header
TurbineCore 2 020359
020359
Our best selling Turbinecore 2 uses the exclusive "Turbine Dampening System". This top-notch product has well earned its U.S. Forest legal status. The straight through design of the spark arrestor canister and the performance flow stainless steel end cap ensures strength, durability and most importantly, track and trail proven unrestricted power. The Turbinecore 2 is the #1 spark arrestor in the world.
Select your application below for more info
FMF BANSHEE 87-06 O-RING KIT REPLACEMENT P/N 014880 014880
014880
Fatty 020087
020087
Our Fatty Gold Series pipe broadens the powerband and provides a healthy power increase everywhere. Improved throttle response, a linear powerband and enhanced over-rev all add up to a pipe that everyone will benefit from. The Fatty pipe is our most popular pipe for that same reason. If you’re riding trails, tracks or in the open desert, this pipe has what you’re looking for.
- Number one pipe on the market.
- FMF Racing’s Tru-Flo stamping process ensures a perfect fit and optimum performance.
- Includes O-rings.
FMF TRX250R 86-89 PIPE O-RING REBUILD KIT P/N 014892 014892
014892
Fatty 020088
020088
Our Fatty Gold Series pipe broadens the powerband and provides a healthy power increase everywhere. Improved throttle response, a linear powerband and enhanced over-rev all add up to a pipe that everyone will benefit from. The Fatty pipe is our most popular pipe for that same reason. If you’re riding trails, tracks or in the open desert, this pipe has what you’re looking for.
- Number one pipe on the market.
- FMF Racing’s Tru-Flo stamping process ensures a perfect fit and optimum performance.
- Includes O-rings.
PowerBomb 043209
043209
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
PowerCore 2 020264
020264
The infamous Powercore 2 is the measure which others aim for. With its lightweight extruded aluminum oval canister mated to a perforated core, this silencer is above the competition. The Powercore 2 silencer provides a strong performance edge for any 2-stroke machine and the performance flow end cap and front stinger are stainless steel for unbeatable durability and an unmatched look.
Select your application below for more info
PowerBomb 044432
044432
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
PowerCore 4 044016
044016
We developed the PowerCore4 to increase the horsepower and torque throughout the entire power curve producing a noticeable power increase that is useable and compatible with every style of riding. Aluminum construction and stainless steel Hi-Flo endcaps make for the perfect balance of performance and strength.
- Aluminum performance muffler with durable stainless steel components
- Completely redesigned for all late model applications
- Removable spark arrestor included
TurbineCore 2 020330
020330
Our best selling Turbinecore 2 uses the exclusive "Turbine Dampening System". This top-notch product has well earned its U.S. Forest legal status. The straight through design of the spark arrestor canister and the performance flow stainless steel end cap ensures strength, durability and most importantly, track and trail proven unrestricted power. The Turbinecore 2 is the #1 spark arrestor in the world.
Select your application below for more info
PowerCore 2 020211
020211
The infamous Powercore 2 is the measure which others aim for. With its lightweight extruded aluminum oval canister mated to a perforated core, this silencer is above the competition. The Powercore 2 silencer provides a strong performance edge for any 2-stroke machine and the performance flow end cap and front stinger are stainless steel for unbeatable durability and an unmatched look.
Select your application below for more info
Fatty Pipe 023037
023037
Applications:
PowerBomb 045286
045286
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
PowerCore 4 044263
044263
We developed the PowerCore4 to increase the horsepower and torque throughout the entire power curve producing a noticeable power increase that is useable and compatible with every style of riding. Aluminum construction and stainless steel Hi-Flo endcaps make for the perfect balance of performance and strength.
- Aluminum performance muffler with durable stainless steel components
- Completely redesigned for all late model applications
- Removable spark arrestor included
PowerCore 2 023038
023038
Applications: