79 products
79 products
FMF STAINLESS HEADER HEAT SHIELD (UNIVERSAL) 040231
040231
Stainless Steel Heat Shield will only work with either Hi-Flo or PowerBomb headers. Will not fit over MegaBomb header.
P-CORE 4/Q4/TI P-CORE S/S SLASH CUT REPLACEMENT REAR CONE CAP 040635
040635
-Complete end cap rebuild kit. The kit includes Stainless Steel end cap, 3/16 stainless steel rivets, strap mounts to secure end cap to canister, and a tube of high temperature silicone.
-Fits all Powercore 4 and Q4 mufflers with riveted mount. Will not fit on Mini Powercore 4 applications.
T-CORE 2 REPLACEMENT REAR CONE CAP-1.375" 020465
020465
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
Fatty 020143
020143
Our Fatty Gold Series pipe broadens the powerband and provides a healthy power increase everywhere. Improved throttle response, a linear powerband and enhanced over-rev all add up to a pipe that everyone will benefit from. The Fatty pipe is our most popular pipe for that same reason. If you’re riding trails, tracks or in the open desert, this pipe has what you’re looking for.
- Number one pipe on the market.
- FMF Racing’s Tru-Flo stamping process ensures a perfect fit and optimum performance.
- Includes O-rings.
P-CORE 4/Q4 S/S STRAIGHT CUT REPLACEMENT REAR CONE CAP 040634
040634
-Complete end cap rebuild kit. The kit includes Stainless Steel end cap, 3/16 stainless steel rivets, strap mounts to secure end cap to canister, and a tube of high temperature silicone.
-Fits all Powercore 4 and Q4 mufflers with separate strap mount applications.
P-CORE 4/Q4 HEX S/S REPLACEMENT REAR CONE CAP 040676
040676
TRX400EX'99-08/TRX400X'09-10/TRX450R'04-10/XR400'96-04 ALUM. MFLR. SLEEVE 040654
040654
Mid pipe aluminum sleeve worn out? We now offer a replacement aluminum inlet sleeve for most models.
FMF TITANIUM HEADER HEAT SHIELD (UNIVERSAL) 040230
040230
Titanium Heat Shield will only work with either Hi-Flo or PowerBomb headers. Will not fit over MegaBomb header.
P-CORE 2 REPLACEMENT REAR CONE CAP-1.0" 020461
020461
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
BLASTER BOLT ON FLANGE ASSEMBLY 020474
020474
BLASTER BOLT ON FLANGE ASSEMBLY
MegaBomb 044358
044358
Factory 4.1 RCT Anodized Full System/ Carbon End Cap 044438
044438
PowerBomb 041622
041622
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
P-CORE 2/T-CORE 2 REPLACEMENT REAR CONE CAP-1.250" 020464
020464
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
FMF BANSHEE 87-06 PIPE SPRING & O-RING KIT P/N 011319 011319
011319
PowerBomb 044033
044033
The redesigned PowerBomb is a four-stroke header that incorporates FMF’s patented PowerBomb module at a precise location in the initial stage of the header. By positioning this “Bomb” at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity. Additionally, the PowerBomb is a “pre-muffler” of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
TurbineCore 2 020359
020359
Our best selling Turbinecore 2 uses the exclusive "Turbine Dampening System". This top-notch product has well earned its U.S. Forest legal status. The straight through design of the spark arrestor canister and the performance flow stainless steel end cap ensures strength, durability and most importantly, track and trail proven unrestricted power. The Turbinecore 2 is the #1 spark arrestor in the world.
Select your application below for more info
P-CORE 2 REPLACEMENT REAR CONE CAP-1.125" 020462
020462
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
PowerCore 2 020263
020263
The infamous Powercore 2 is the measure which others aim for. With its lightweight extruded aluminum oval canister mated to a perforated core, this silencer is above the competition. The Powercore 2 silencer provides a strong performance edge for any 2-stroke machine and the performance flow end cap and front stinger are stainless steel for unbeatable durability and an unmatched look.
Select your application below for more info
PowerBomb 041591
041591
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
Banshee Fatty 020145
020145
Our Chrome Fatty Gold Series pipe broadens the powerband and provides a healthy power increase everywhere. Improved throttle response, a linear powerband and enhanced over-rev all add up to a pipe that everyone will benefit from. The Fatty pipe is our most popular pipe for that same reason. If you’re riding trails, tracks or in the open desert, this pipe has what you’re looking for.
- Number one pipe on the market.
- FMF Racing’s Tru-Flo stamping process ensures a perfect fit and optimum performance.
- Includes O-rings.
Universal TurbineCore 2 Spark Arrestor Silencer outlet 1-1/8" Spark Arrestor Part # 020302
020302
- This is a great universal spark arrestor for 2-stroke machines! Using the proven design of the FMF Turbine Core Spark Arrestor is made specifically for those machines that do not have a bolt on application. Using the exclusive "Turbine Dampening System" makes it a U.S. Forestry approved silencer. The Universal is also perfect for the older vintage machines in need of a legal spark arrestor. This spark arrestor comes with a kit of hardware including a mounting bracket, spacers, stinger tube, and stainless steel mounting strap that paves the way for the garage mechanic to fit the unit onto their machine.
PowerCore 4 044300
044300
We developed the PowerCore4 to increase the horsepower and torque throughout the entire power curve producing a noticeable power increase that is useable and compatible with every style of riding. Aluminum construction and stainless steel Hi-Flo endcaps make for the perfect balance of performance and strength.
- Aluminum performance muffler with durable stainless steel components
- Completely redesigned for all late model applications
- Removable spark arrestor included
PowerBomb 044298
044298
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
HON CRF150F'03-17/CRF230F'03-17/19 Q4 S/A MFLR 041332
041332
FMF is the leader in high performance quiet technology and our Q4 is the next evolution in off road exhaust. The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available. With the Q4 you don’t need to hear the power, just feel the power!
- Developed over years of championship off-road racing
- Max Sound output 96dB; most models below 93dB
- Constructed from aircraft grade aluminum and high strength stainless steel
- Use with stock or FMF header
PowerCore 2 020264
020264
The infamous Powercore 2 is the measure which others aim for. With its lightweight extruded aluminum oval canister mated to a perforated core, this silencer is above the competition. The Powercore 2 silencer provides a strong performance edge for any 2-stroke machine and the performance flow end cap and front stinger are stainless steel for unbeatable durability and an unmatched look.
Select your application below for more info
P-CORE 2 REPLACEMENT REAR CONE CAP-.875" 020460
020460
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
Fatty 020088
020088
Our Fatty Gold Series pipe broadens the powerband and provides a healthy power increase everywhere. Improved throttle response, a linear powerband and enhanced over-rev all add up to a pipe that everyone will benefit from. The Fatty pipe is our most popular pipe for that same reason. If you’re riding trails, tracks or in the open desert, this pipe has what you’re looking for.
- Number one pipe on the market.
- FMF Racing’s Tru-Flo stamping process ensures a perfect fit and optimum performance.
- Includes O-rings.
Fatty 020087
020087
Our Fatty Gold Series pipe broadens the powerband and provides a healthy power increase everywhere. Improved throttle response, a linear powerband and enhanced over-rev all add up to a pipe that everyone will benefit from. The Fatty pipe is our most popular pipe for that same reason. If you’re riding trails, tracks or in the open desert, this pipe has what you’re looking for.
- Number one pipe on the market.
- FMF Racing’s Tru-Flo stamping process ensures a perfect fit and optimum performance.
- Includes O-rings.
PowerBomb 044432
044432
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
PowerBomb 041223
041223
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
TurbineCore 2 020360
020360
Our best selling Turbinecore 2 uses the exclusive "Turbine Dampening System". This top-notch product has well earned its U.S. Forest legal status. The straight through design of the spark arrestor canister and the performance flow stainless steel end cap ensures strength, durability and most importantly, track and trail proven unrestricted power. The Turbinecore 2 is the #1 spark arrestor in the world.
Select your application below for more info
PowerCore 020279
020279
The original Powercore is a lightweight and compact silencer constructed of an extruded aluminum canister with nickel plated stinger and end cap. It is fully re-buildable using basic hand tools. It offers that factory look and sound while giving you an increase in power over the stock silencer.
PowerCore 2 020211
020211
The infamous Powercore 2 is the measure which others aim for. With its lightweight extruded aluminum oval canister mated to a perforated core, this silencer is above the competition. The Powercore 2 silencer provides a strong performance edge for any 2-stroke machine and the performance flow end cap and front stinger are stainless steel for unbeatable durability and an unmatched look.
Select your application below for more info
T-CORE 2.1 REPLACEMENT SLASH CUT S/S REAR CONE CAP-1.250" 020528
020528
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
P-CORE 2.1 REPLACEMENT SLASH CUT S/S REAR CONE CAP-30mm 020529
020529
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
HON TRX90EX'06-08/TRX90X'09/13-21 P-CORE 4 S/A MFLR W/SS HEADER 041244
041244
We developed the PowerCore4 to increase the horsepower and torque throughout the entire power curve and give you a noticeable power increase that is very usable and beneficial, no matter what your riding style or ability is.
- Space Age internal packing for maximum packing life.
- Hi-Flo modular end cap.
- Internal shape of core uses Hi-Flo technology.
- Enhanced sonic evacuation provides for higher flow and increased power.
P-CORE 2.1 REPLACEMENT SLASH CUT S/S REAR CONE CAP-1.145" 020527
020527
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
P-CORE 2.1 REPLACEMENT SLASH CUT S/S REAR CONE CAP-1.090" 020526
020526
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
P-CORE 2.1 REPLACEMENT SLASH CUT S/S REAR CONE CAP-1.010" 020525
020525
End Cap Kits-
·The kit includes Stainless Steel End Cap and 3/16 Stainless Steel Rivets.
·Comes in four sizes 1.0”1.125”, 1.250" or 1.375”
PowerBomb 045286
045286
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). On some models, you can choose between a moto or supercross version. The supercross version is designed for more low to mid-range power where the moto version is focused in the mid to upper RPM range.
Select your application below for more info
PowerCore 2 023038
023038
Applications: